Cable - Four Rope

Anvil's 4-rope clamshell buckets are designed for use on overhead cranes.  These buckets are of rugged construction to withstand the punishment of the application. To prevent wet fines from packing in lower sheave nest, the lower sheave nest is raised and provided with adequate drain passages beneath the sheaves. Buckets are fitted with perforated bowl scoops for water drainage, allowing the bucket to pick up more coke than water. They are commonly used for working at coke pits in refineries.

Model 4RD

DESCRIPTION Anvil’s Direct reeved (holding and closing cables end at bucket) model designed for overhead gantry and bridge cranes
SIZES 3 cubic yards to 45 cubic yards
MATERIALS HANDLED Coke, Coal, Ores, Cement, Ash

 

 

 

Model 4RF

DESCRIPTION Anvil’s Fleet thru reeved (holding and closing cables end at crane) model designed for overhead gantry and bridge cranes
SIZES 3 cubic yards to 45 cubic yards
MATERIALS HANDLED Coke, Coal, Ores, Cement, Ash

 

 

 

OPTIONS

Cutting edges

Operation

Material

Material upgrade to AR400

Material handling

Upgrade mainshafts and lower arm pins and bushings to a combination of stainless steel overlay or Astralloy pins with manganese bushings

Bolt on reversible bottom and partial side lips

Bolt on dust covers

Bolt on teeth

Direct reeved (holding and closing cables end at bucket) model 4RD

Rubber sealed lip

Fleet thru reeved (holding and closing cables end at crane) model 4RF

Weld on

Special reeved (holding line ends at crane and closing line ends at bucket) model 4RS

Bolt on

 

Lap sealed lip - weld on only