5 Tine Hydraulic Scrap Grapple - Model H5T

5 Tine 5 Cubic Yard Hydraulic Scrap Grapple from Anvil Attachments on Vimeo.

5 Tine Hydraulic Scrap Grapple - FEATURES

 

  • Pins and bushings are oversized and heat treated for maximum wear life.
  • Tines are T-1 (A514) alloy steel for longer wear life.
  • Tine points are replaceable 500 BHN wear resistant alloy steel.
  • Cylinders are oversized and pressure tested for both high and low pressure applications.
  • Cylinders have self aligning bearings to protect against side loading.
  • Cylinder and rod covers protect against damage.
  • Designs available for direct mount, knock-around or power rotation.
  • Tines available in narrow, semi or fully enclosed design.
CYLINDER FEATURES  
 

* Updated design to increase performance and reliability

* Inertia welded rod eye

* 35% Increased surface area at lower cylinder pin connection

* Grease seals added to lower pin connection

* Bronze bushing replaces spherical bearing

 CYLINDER
ROTATION  

* Separate components allowing for maximum durability

* Bearings have 30% Higher Load Ratings

* Motor features built in cross over relief

* Swivel is rated at 5000 PSI

ROTATION 

 

 

TINE PIN CONNECTION  
 

* Improved design offers 2X longer life

* 35% Increased surface area at tine pin connection

* Sealed connection retains grease

 

TINE PIN

TINES

 * Proven modular design to decrease stress while increasing structural integrity

* High strength wear resistant alloy steel

* In house Finite Element Analysis and 3D design

 

5 Tine Hydraulic Scrap Grapple - SPECIFICATIONS

 

MODEL

CAPACITY

(HEAPED)

LENGTH OPEN

LENGTH CLOSED

HEIGHT OPEN

HEIGHT CLOSED

STANDARD WEIGHT

CYLINDER PRESSURE

(MAX-PSI)

CYLINDER FLOW RATE

(MAX-GPM)

CH-075-5

3/4 CU YD

7’ 0”

4’ 8”

6’ 11”

8’ 1”

3700

5000

50

CH-100-5

1 CU YD

7’ 4”

4’ 11”

7’ 0”

8’ 3”

4000

5000

50

CH-125-5

1 1/4 CU YD

7’ 11”

5’ 3”

7’ 2”

8’ 8”

4300

5000

50

CH-150-5

1 1/2 CU YD

8’ 2”

5’ 5”

7’ 3”

8’ 9”

4700

5000

50

CH-175-5

1 3/4 CU YD

8’ 5”

5’ 7”

7’ 4”

8’ 11”

4900

5000

50

CH-200-5

2 CU YD

9’ 2”

5’ 9”

7’ 7”

9’ 5”

5400

5000

50

CH-250-5

2 1/2 CU YD

10’ 8”

6’ 10”

8’ 3”

10’ 6”

5900

5000

50

CH-300-5

3 CU YD

11’ 1”

7’ 3”

8’ 11”

10’ 8”

6800

5000

75

CH-350-5

3 1/2 CU YD

11’ 7”

7’ 9”

9’ 1”

10’ 11”

7300

5000

75

CH-400-5

4 CU YD

13’ 0”

9’ 0”

9’4”

11” 0”

7800

5000

100

CH-450-5

4 1/2 CU YD

13’ 3”

9’ 2”

9’ 6”

11’ 4”

8300

5000

100

CH-500-5

5 CU YD

13’ 6”

9’ 4”

9’ 8”

11’ 6”

9000

5000

100