4RD FOUR ROPE - DIRECT REEVED

FOUR ROPE CANTILEVER BUCKET

 

4RD Four Rope Clamshell Buckets are operated by four rope cable cranes.  The "D" indicates that this is a direct reeved bucket.  The cable comes from the crane, reeves through the buckets and dead ends in the bucket.

  • Sheave dia./Cable dia. Ratio 30:1
  • Sheaves w/ hardened grooves riding on bronze bushings for longer life.
  • Closed guarding of cable to exclude material from going in sheave pocket
  • Dead end on lower sheave block for easy access.
  • Grease lines run inside channel on arms to upper extremities.
  • Corner rim bar wear pads just below lower corner arm brackets. AR400 MTL
  • Wear bumpers on bottom wear runners. AR400 MTL

4Rf FOUR ROPE - FLEET THROUGH4RF FOUR ROPE FLEET THROUGH BUCKET

4RF Four Rope Clamshell Buckets are operated by four rope cable cranes.  The "F" indicates that this is a "Fleet Through" bucket.  The cable comes from the crane, reeves through the buckets and continues out the bucket and back to the crane.

  • Sheave dia./Cable dia. Ratio 30:1
  • Sheaves w/ hardened grooves riding on bronze bushings for longer life.
  • Closed guarding of cable to exclude material from going in sheave pocket
  • Dead end on lower sheave block for easy access.
  • Grease lines run inside channel on arms to upper extremities.
  • Corner rim bar wear pads just below lower corner arm brackets. AR400 MTL
  • Wear bumpers on bottom wear runners. AR400 MTL

INDUSTRIES

Anvil Attachments Four Rope Cantilever Grabs are primarily used in the Ports and Stevedoring Industries.  They are also used for handling Pet Coke.

  • Ports and Stevedoring
  • Pet Coke

OPTIONS

Four Rope Cantilever Grabs are available with a wide variety of options to fit your individual material handling requirements. 

FOR DETAILED OPTION INFORMATION

button

4RD THUMB